Congrats on your first suppressor! Hopefully, you’ve already taken advantage of the unprecedented $0 tax stamp for NFA items and had your paperwork processed in record time. Now what?
Last time our Editor Scott talked about what happens in terms of the political and legal landscape when it comes to this new era of NFA ownership, this time I want to give you guys a few suggestions on filling out your range bag with some handy suppressor tools that will help you keep your special tube, and the gun it’s attached to, running at peak efficiency.
Disassembly Tools
Most suppressors will come with the single most important tool that you need for mounting and unmounting your suppressor. Most of the time, this will take the form of a proprietary wrench or small tool that can either be used by hand or attached to a spanner or socket wrench to help you remove the mount and sometimes even the end cap.
Other suppressors like the Faxon Twnety-Toucan come with a small challenge coin that serves as a cool display piece, as well as a handy tool for scraping off carbon, and more importantly, tightening down the end cap to make sure the modular suppressor stays together when you’re using it.
If a wrench isn’t included, a good multi‑tooth spanner or a square‑drive suppressor socket that fits a torque wrench or breaker bar is a solid alternative.
A small torque wrench (or torque adapter that fits a standard click wrench) is also extremely useful, especially for QD systems and muzzle devices. It lets you tighten mounts and end caps to the manufacturer’s spec, which is important for both safety and consistent performance. A short breaker bar or T‑handle gives extra leverage when a cap is stubborn, without needing a long pipe wrench that can damage threads or the can itself.
Not every suppressor has flats or a wrench‑friendly surface on the body, and that’s where a strap wrench becomes a must‑have tool. A strap wrench grips the suppressor tube with a wide, non‑marring band, allowing you to apply torque without crushing or scratching the can. This is especially helpful when dealing with a carbon‑locked or over‑tightened suppressor that won’t budge with hand strength alone.
Cleaning & Baffle Tools
For cleaning and restoring your suppressor to factory-new condition, traditional and easily accessible tools make it next to impossible. However, if your goal, like mine, is to remove a majority of the carbon and fouling without scratching baffles or the tube, off-the-shelf tools and readily available non-toxic chemicals are easily accessible.
I’d first recommend a dedicated baffle removal or straightening tool (often included in manufacturer tool kits, but not always). These allow you to push out and realign baffles cleanly, avoiding gouges that can trap carbon or worse, crack or bend baffles made from less durable materials like aluminum. If a baffle tool isn’t available, a simple brass or nylon‑tipped pick can work for light cleaning, but it should be used carefully to avoid damaging baffle edges.
If you’re looking for a less labor-intensive method for cleaning, modern suppressor‑specific solvents are formulated to dissolve carbon, lead, and copper without damaging the stainless steel, titanium, or coatings. Silencer Shop stocks solvents like CAT206 (for titanium and Inconel) or similar suppressor-specific cleaners, which can be used to soak the can without disassembly.
This is a huge time-saver for many centerfire models. For sealed or semi‑sealed cans, a simple soak in the appropriate solvent, followed by a rinse and dry, is often all that’s needed to maintain performance.
Sometimes baffles can become stubborn or slightly deformed from heat and pressure, making them difficult to push out with fingers or a small tool. In those cases, a smooth Delrin rod or a wooden dowel, a brass or nylon brush, and, of course, lots of rags and some good solvent can be extremely effective and less time-consuming than sending your suppressor off for a lengthy and sometimes costly refurbishing. Dedicated and more expensive tools exist for those who want a custom-tooled solution for removing stuck or stubborn baffles.
(Writer’s note: I am aware of the “Dip” method of cleaning, and while I don’t personally recommend it, we’ll cover it in a later article)
At the Range
At the range, I like to keep a few tools around that can handle minor issues without carrying a full bench setup. First and foremost is a good heat-resistant glove or even your run-of-the-mill oven mitt. Silencer Shop has specially branded ones that I’m quite fond of, but there are a ton of great options out there. The heat-resistant glove/mitt is simply there to help re-tighten a hot or recently used suppressor that has started to rotate off its threading.
And finally, while not a necessity, I also like to have a set of caliber-specific alignment rods around for when I’m moving my suppressor from gun to gun. Minor misalignments, either from manufacturing defects like improper threading of the gun’s barrel or the mount, can lead to a costly baffle strike. Alignment rods are most commonly made from stiff metal, but carbon fiber rods that won’t damage your rifling are now also available and decently affordable for the suppressor aficionados among us.
Closing Thoughts
Just like with our guns, suppressors often require specific or niche tools that you won’t typically find in your standard Snap-On toolbox. However, a majority of these tools you won’t need to bring to the range with you, but rather keep at home or at most in the car, so that you can keep the range session going (quietly) rather than a shameful drive back home to re-secure a thread adapter, or worse, a broken or damaged suppressor.
Now that the paperwork is behind you, you can shoot quietly, safely, and keep building out that kit that perfectly suits you and your firearm’s needs. Please let us know in the comments what your favorite or uncommon suppressor cleaning/maintenance tools are!
